Annual Report 2010: Service Activities

Books, Chapters, Editorials:

  1. M. W. Barsoum, "Physical Properties of the MAX Phases,"Encyclopedia of Materials Science & Technology, Eds. Buschow, Cahn, Flemings, Kramer, Mahajan and Veyssiere, Elsevier Science, 2006.
  2. B. Verlinden, J. Driver I. Samajdar, andR. D. Doherty,Thermomechanical Processing, Elsevier, July 2007.

Refereed Journal Publications:

  1. Barsoum, M. W., A. Ganguly, and G. Hug, "Microstructural evidence of reconstituted limestone blocks in the Great Pyramids of Egypt." Journal of the American Ceramic Society, 2006. 89(12): p. 3788-3796.
  2. Basu, S., M. W. Barsoum, T. D. Moustakas, A. D. Williams, et al., "Spherical nanoindentation and deformation mechanisms in freestanding GaN films." Journal of Applied Physics, 2007. 101(8).
  3. Basu, S., A. Moseson, and M. W. Barsoum, "On the determination of spherical nanoindentation stress-strain curves." Journal of Materials Research, 2006. 21(10): p. 2628-2637.
  4. Sun, Z., H. Hashimoto, and M. W. Barsoum, "On the effect of environment on spontaneous growth of lead whiskers from commercial brasses at room temperature." Acta Materialia, 2007. 55(10): p. 3387-3396.
  5. Yushin, G., E. N. Hoffman, M. W. Barsoum, Y. Gogotsi, C. A. Howell, S. R. Sandeman, G. J. Phillips, A. W. Lloyd, S. Mikhalovsky, "Mesoporous carbide-derived carbon with porosity tuned for efficient adsorption of cytokines." Biomaterials, 2006. 27(34): p. 5755-5762.
  6. Manoun, B., F. Zhang, S. K. Saxena, S. Gupta and M. W. Barsoum, "On the Compression Behavior of (Ti0.5,V0.5)2AlC and (Ti0.5,Nb0.5)2AlC to Quasi-Hydrostatic Pressures Above 50 GPa." J. Phys. Conds. Matter, 2007. 19(246215): p. 8.
  7. Ganguly, A., M. W. Barsoum, and R. D. Doherty, "Interdiffusion between Ti3SiC2-Ti3GeC2 and Ti2AlC-Nb2AlC diffusion couples." Journal of the American Ceramic Society, 2007. 90(7): p. 2200-2204.
  8. Gupta, S., E. N. Hoffman, and M. W. Barsoum, "Synthesis and oxidation of Ti2InC, Zr2InC, (Ti-0.5,Zr-0.5)(2)InC and (Ti0.5,Hf-0.5)(2)InC in air." Journal of Alloys and Compounds, 2006. 426(1-2): p. 168-175.
  9. Drulis, M. K., H. Drulis, A. E. Hackemer, A. Ganguly, T. El-Raghy, M.W. Barsoum, "On the low temperature heat capacities of Ti2AlN and Ti2Al(N0.5Co0.5)." Journal of Alloys and Compounds, 2007. 433(1-2): p. 59-62.
  10. Eklund, P., A. Murugaiah, J. Emmerlich, , Z. Czigany, J. Frodelius, M.W. Barsoum, H. Hogberg, L. Hultman, "Homoepitaxial growth of Ti-Si-C MAX-phase thin films on bulk Ti3SiC2 substrates." Journal of Crystal Growth, 2007. 304(1): p. 264-269.
  11. Gupta, S., D. Filimonov, T. Palanisamy, T. El-Raghy, M. W. Barsoum, "Ta2AlC and Cr2AlCAg-based composites - New solid lubricant materials for use over a wide temperature range against Ni-based superalloys and alumina." Wear, 2007. 262(11-12): p. 1479-1489.
  12. Jovic, V. D., B. M. Jovic, S. Gupta, T. El-Raghy, M. W. Barsoum, "Corrosion behavior of select MAX phases in NaOH, HCl and H2SO4." Corrosion Science, 2006. 48(12): p. 4274-4282.
  13. Lofland, S. E., J. D. Hettinger, T. Meehan, A. Bryan, P. Finkel, S. Gupta, M. W. Barsoum, G. Hug, "Electron-phonon coupling in M(n+1)AX(n)-phase carbides." Physical Review B, 2006. 74(17).
  14. Manoun, B., S. K. Saxena, G. Hug, A. Ganguly, E. N. Hoffman, M. W. Barsoum, "Synthesis and compressibility of Ti-3(Al,Sn-0.2)C-2 and Ti3Al(C-0.5,N-0.5)(2)." Journal of Applied Physics, 2007. 101(11).
  15. Manoun, B., H. Yang, S. Saxena, A. Ganguly, M. W. Barsoum, B. El Bali, Z.
  16. M. Lachkar, "Infrared spectrum and compressibility of Ti3GeC2 to 51 GPa." Journal of Alloys and Compounds, 2007. 433(1-2): p. 265-268.
  17. S. L. Semiatin, T. M. Lehner , J. D. Miller, R. D. Doherty and D. U. Furrer, "Alpha/Beta Heat Treatment of a Titanium alloy with a non-Uniform Microstructure." Metall & Mater Trans., 38A 910-921.
  18. Doherty, R. D., D. Stojakovic, F. J. G. Landgraf, and S. R. Kalidindi, "Retention of the <001> Fiber Texture for Fe-Si Electric Motor Steels." Materials Science Forum, 2007. 550: p. 497-502.
  19. Fullwood, D. T., B.L. Adams, and S. R. Kalidindi, "Generalized Pareto front methods applied to second-order material property closures." Computational Materials Science, 2007. 38(4): p. 788-799.
  20. Kalidindi, S. R., M. Binci, D. T. Fullwood, B. L. Adams, "Elastic Properties Closures Using Second-Order Homogenization Theories: Case Studies in Composites of Two Isotropic Constituents,"Acta Materialia, 2006. 54: p. 3117-3126.
  21. Mattia, D., G. Korneva, A. Sabur, G. Friedman, Y. Gogotsi, "Embedding Nanoparticles in the Walls of Carbon Nanotubes." Nanotechnology, 2007. 18 (155305).
  22. Cambaz, Z. G., G. Yushin, Y. Gogotsi, and V. G. Lutsenko, "Anisotropic Etching of SiC Wiskers." Nano Letters, 2006. 6(3): p. 548-551.
  23. Chmiola, J. and Y. Gogotsi, "Supercapacitors as Advanced Energy Storage Devices." Nanotechnology Law and Business, 2007. 4(1): p. 577-584.
  24. Gogotsi, Y., R. Dash, G. Yushin, B. Carroll, S. Altork, S. Sassi-Gaha, and R. Rest, "Bactericidal Activity of Chlorine-Loaded Carbide Derived Carbon Against Escherichia Coli and Bacillus Anthracis." J. Biomed. Mater. Res., 2006.
  25. Osswald, S., M. Havel, and Y. Gogotsi, "Monitoring oxidation of multiwalled carbon nanotubes by Raman spectroscopy." Journal of Raman Spectroscopy, 2007. 38(6): p. 728-736.
  26. Yushin, G., R. K. Dash, Y. Gogotsi, and J. E. Fischer, "Enhanced Hydrogen Uptake by Carbide Derived Carbons with Optimized Pore Structure." Advanced Functional Materials, 2006. 16: p. 2288-2293.
  27. Chmiola, J., G. Yushin, R. Dash, Y.Gogotsi, "Effect of pore size and surface area of carbide derived carbons on specific capacitance." Journal of Power Sources, 2006. 158(1): p. 765-772.
  28. Gurga, A., T. Juliano, Y. Gogotsi, S. Dub, N. Stus, D. Stratiichuk, V. Lisnyak, "The mechanical properties of lithium tetraborate (100), (011) and (112) faces." Materials Letters, 2007. 61(3): p. 770-773.
  29. Chmiola, J., G. Yushin, Y. Gogotsi, C. Portet, P. Simon, P. Taberna, "Anomalous increase in carbon capacitance at pore sizes less than 1 nanometer." Science, 2006. 313(5794): p. 1760-1763.
  30. Dash, R., J. Chmiola, G. Yushin, Y. Gogotsi, G. Laudisio, J. Singer, J. Fischer, S. Kucheyev, "Titanium carbide derived nanoporous carbon for energy-related applications." Carbon, 2006. 44(12): p. 2489-2497.
  31. Freedman, J. R., D. Mattia, G. Korneva, Y. Gogotsi, G. Friedman, A. K. Fontecchio, "Magnetically assembled carbon nanotube tipped pipettes." Applied Physics Letters, 2007. 90(10).
  32. Jaszczak, J. A., S. Dimovski, S. A. Hackney, G. W. Robinson, P. Bosio, Y. Gogotsi, "Micro- and nanoscale graphite cones and tubes from Hackman Valley, Kola Peninsula, Russia." Canadian Mineralogist, 2007. 45: p. 379-389.
  33. Laudisio, G., R. K. Dash, J. P. Singer, G. Yushin, Y. Gogotsi, J. Fischer, "Carbide-derived carbons: A comparative study of porosity based on small-angle scattering and adsorption isotherms." Langmuir, 2006. 22(21): p. 8945-8950.
  34. Osswald, S., G. Yushin, V. Mochalin, S. Kucheyev, Y. Gogotsi, "Control of sp(2)/sp(3) carbon ratio and surface chemistry of nanodiamond powders by selective oxidation in air." Journal of the American Chemical Society, 2006. 128(35): p. 11635-11642.
  35. Sinha, S., M. P. Rossi, D. Mattia, Y. Gogotsi, H. Bau, "Induction and measurement of minute flow rates through nanopipes." Physics of Fluids, 2007. 19(1).
  36. Vyshnyakova, K., G. Yushin, L. Pereselentseva, Y. Gogotsi, "Formation of porous SiC ceramics by pyrolysis of wood impregnated with silica." International Journal of Applied Ceramic Technology, 2006. 3(6): p. 485-490.
  37. Proust, G. and S. R. Kalidindi, "Procedures for construction of anisotropic elastic-plastic property closures for face-centered cubic polycrystals using first-order bounding relations." Journal of the Mechanics and Physics of Solids, 2006. 54(8): p. 1744-1762.
  38. Delannay, L., P. J. Jacques, and S. R. Kalidindi, "Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons." International Journal of Plasticity, 2006. 22(10): p. 1879-1898.
  39. Duvvuru, H. K., M. Knezevic, R. K. Mishra, and S. R. Kalidindi, "Application of Microstructure Sensitive Design to FCC Polycrystals." Materials Science Forum, 2007. 546-549: p. 675-680.
  40. Kalidindi, S. R. and J. R. Houskamp, "Application of the spectral methods of microstructure design to continuous fiber-reinforced composites." Journal of Composite Materials, 2007. 41(8): p. 909-930.
  41. Knezevic, M. and S. R. Kalidindi, "Fast computation of first-order elastic-plastic closures for polycrystalline cubic-orthorhombic microstructures." Computational Materials Science, 2007. 39(3): p. 643-648.
  42. Salem, A. A., T. G. Langdon, T. R. McNelley, S. R. Kalidindi, S. Semiatin, "Strain-path effects on the evolution of microstructure and texture during the severe-plastic deformation of aluminum." Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 2006. 37A(9): p. 2879-2891.
  43. Wu, X., G. Proust, M. Knezevic, S. R. Kalidindi, "Elastic-plastic property closures for hexagonal close-packed polycrystalline metals using first-order bounding theories." Acta Materialia, 2007. 55(8): p. 2729-2737.
  44. Wu, X. P., S. R. Kalidindi, C. Necker, A. Salem, "Prediction of crystallographic texture evolution and anisotropic stress-strain curves during large plastic strains in high purity alpha-titanium using a Taylor-type crystal plasticity model." Acta Materialia, 2007. 55(2): p. 423-432.
  45. Ivosevic, M., R. A. Cairncross, and R. Knight, "Melting and degradation of nylon-11 particles during HVOF combustion spraying." Journal of Applied Polymer Science, 2007. 105(2): p. 827-837.
  46. Ivosevic, M., V. Gupta, J. A. Baldoni, R. A. Cairncross, T. E. Twardowski, R. Knight, "Effect of substrate roughness on splatting behavior of HVOF sprayed polymer particles: Modeling and experiments." Journal of Thermal Spray Technology, 2006. 15(4): p. 725-730.
  47. Niezgoda, S., V. Gupta, R. Knight, R. Cairncross, T. Twardowski, "Effect of reinforcement size on the scratch resistance and crystallinity of HVOF sprayed nylon-11/ceramic composite coatings." Journal of Thermal Spray Technology, 2006. 15(4): p. 731-738.
  48. Birnkrant, M. J., H. McWilliams, C. Y. Li, L. V. Natarajan, V. P. Tondiglia, P. F. Lloyd, R. L. Sutherland, T. J. Bunning, "On the Structure of Holographic Polymer Dispersed Polyethylene Glycol." Polymer, 2006, 47: 8147-8154.
  49. Li, B. and C. Y. Li, "Immobilizing Au Nanoparticles with Polymer Single Crystals, Patterning and Asymmetric Functionalization." J. Am. Chem. Soc., 2007, 129: 12-13.
  50. Chen, X., K. K. Tenneti, C. Y. Li, Y. Bai, R. Zhou, X. Wan, X. Fan, Q-F Zhou, "Synthesis and Characterization of Side Chain Liquid Crystalline Poly(meth)acrylates with Bent-core Mesogens." Macromolecules, 2007, 40: 840-848.
  51. Li, L., C. Y. Li, C. Ni, L. Rong and B. S. Hsiao, "Structure and Crystallization Behavior of Nylon 66/Multi-Walled Carbon Nanotube Nanocomposites at Low Carbon Nanotube Contents." Polymer, 2007, 48: 3452-3460.
  52. Tenneti, K. K., X. Chen, C. Y. Li, X. Wan, X. Fan, Q-F Zhou, L. Rong and B. S. Hsiao, "Hierarchical Nanostructures of Bent-core Molecules Blended with Poly(styrene-b-4-vinyl pyridine) Block Copolymer." Macromolecules, 2007, 40: 5095-5102.
  53. Li, L., B. Li, G. Yang, C. Y. Li, "Polymer Decoration on Carbon Nanotubes via Physical Vapor Deposition," Langmuir, 2007, 23: 8522-8525.
  54. Birnkrant, M. J., C. Y. Li, L. V. Natarajan, V. P. Tondiglia, P. F. Lloyd, R. L. Sutherland, T. J. Bunning, "Layer-in-Layer Hierarchical Nanostructures Fabricated by Combining Holographic Polymerization and Block Copolymer Self Assembly." Nano Lett., 2007.
  55. Ho, E., A. Lowman, and M. Marcolongo, "Synthesis and characterization of an injectable hydrogel with tunable mechanical properties for soft tissue repair," Biomacromolecules, 2006, (7) 3223-3228.
  56. Kurtz, S. M., W. Hozack, J. Purtill, M. Marcolongo, M. Kraay, V. Goldberg, P. Sharkey, J. Parvizi, C. Rimnac, A. Edidin, "Significance of in vivo degradation for polyethylene in total hip arthoplasty", Clin Ortho. And Rel. Res., 2006, 459: 47-57.
  57. Perea, W., M. Cannella, A. Vega, T. Polenova, and M. Marcolongo, "2H Double Quantum Filtering (DQF) NMR Can Determine Degenerative Changes in the Nucleus Pulposus of the Intervertebral Disc," Mag. Res. in Med., 2007, 57: 990-999.
  58. Cathell, M. D., C. L. Schauer, "Structurally Colored, Thin Films of Ca2+-crosslinked Alginate." Biomacromolecules, 2007, 8(1): p. 33-41.
  59. Schiffman, J. D. and C. L. Schauer, "Cross-linking chitosan nanofibers." Biomacromolecules, 2007. 8(2): p. 594-601.
  60. Kaufman, J., C. S. Schauer, J. Lyons, "Lobster and crab shells could provide basis for new chemical sensor technologies." International Fiber Journal, 2006. 21(6): p. 52.
  61. Yegingil, H., W. Y. Shih, and W.-H. Shih, "All-Electrical Palpation Shear Modulus and Elastic Modulus Measurement Using a Piezoelectric Cantilever with a Rectangular Tip." J. Appl. Phys., 2007. 101: 054510.
  62. Li, H., W. Y. Shih, and W.-H. Shih, "Synthesis and Characterization of Biocompatible Aqueous Carboxyl-capped CdS Quantum Dots." Ind. & Eng. Chem. Res., 2007. 46: p. 2013-2019.
  63. Capobianco, J., W. Y. Shih, and W.-H. Shih, "3-Mercaptopropyltrimethoxysilane as Insulating Coating and Surface for Protein Immobilization for Piezoelectric Microcantilever Sensors." Rev. Sci. Instru., 2007. 78: 046106.
  64. Li, H., W. Y. Shih, and W.-H. Shih, "Non-Heavy Metal ZnS Quantum Dots with Bright Blue Photoluminescence by a One-Step Aqueous Synthesis," Nanotechnology, 2007. 18: 205604.
  65. Zhu, Q., W. Y. Shih, and W.-H. Shih, " "In-Situ, In-Water Detection of Salmonella typhimurium Using Lead Titanate Zirconate/Gold-Coated Glass Cantilevers at any Dipping Depth." Biosensors and Bioelectronics, 2007. 22: p. 3132-3138.
  66. McGovern, J. P., W. Y. Shih, and W.-H. Shih, "In-Situ Detection of Bacillus Anthracis Spores Using Fully Submersible, Self-Exciting, Self-Sensing PMN-PT/Sn Piezoelectric Microcantilevers." The Analyst, 2007. 132: p. 777-783.
  67. Zhu, Q., W. Y. Shih, and W.-H. Shih, "Real-time, label-free, all-electrical detection of Salmonella typhimurium using lead titanate zirconate/gold-coated glass cantilevers at any relative humidity." Sensors & Actuators B., 2007. 125: p. 379–388.
  68. Cao, L., L. Laim, P.D. Valenzuela, B. Nabet, J. E. Spanier, "On the Raman scattering from semiconducting nanowires." Journal of Raman Spectroscopy, 2007. 38(6): p. 697-703.
  69. Cao, L. Y., B. Caripcan, J. S. Atchison, C. Y. Ni, B. Nabet, J. E. Spanier, "Instability and transport of metal catalyst in the growth of tapered silicon nanowires." Nano Letters, 2006. 6(9): p. 1852-1857.
  70. Zhao, X., A. Cola, A. Tersigni, F. Quaranta, E. Gallo, J. E. Spanier, B. Nabet, "Optically modulated high-sensitivity heterostructure varactor." Ieee Electron Device Letters, 2006. 27(9): p. 710-712.
  71. Dec, R. T. and A. Zavaliangos, "Powder Processing in the Roller Press - Theory and Practice," Powder Handling & Processing, January/February 2007, 19 (1): pp.23-28.