Annual Report 2008: Publications List

Books, Chapters, Editorials:

  1. Holly A. McIlwee**, Jessica D. Schiffman, Matthew D. Cathell,Caroline L. SchauerCurrent Research and Developments on Chitin and Chitosan in Biomaterial Science RESEARCH SIGNPOST; Dr.R.Jayakumar, ed. “Deposition of chitosan: thin films and fibers” in press 2008. (Invited)
  2. Y. Gogotsi, P. Simon, Foreword, in Nanostructured Materials in Electrochemistry, edited by A. Eftekhari, WILEY-VCH, Weinheim, Germany, pp. XVII-XIX (2008).
  3. F. Ko andC. Y. Li, Nanofiber materials, Cambridge Univ. In Preparation, to be published in 2008.

Refereed Journal Publications:

  1. Ivosevic, M, Cairncross, R. A. andKnight, R., “Sliding Wear Properties of HVOF Thermally Sprayed Nylon-11 and Nylon-11/Ceramic Composites on Steel,” Journal of Thermal Spray Technology, 16 (5-6), pp. 927-932, December (2007).
  2. W.-S. Su, Y.-F. Chen, W. Y. Shih, H. Luo, andW.-H. Shih, “Piezoelectric Enhancement and Domain Switching in PMN-PT Polycrystalline Sheets by Piezoresponse Force Microscopy,” Appl. Phys. Lett., 91, 112903 (2007)
  3. H. Li, W. Y. Shih, andW.-H. Shih, “Effect of Antimony Concentration on the Crystalline Structure, Dielectric, and Piezoelectric Properties of (Na0.5K0.5)0.945Li0.055Nb1-xSbxO3 Solids,” J. Am. Ceram. Soc. Comm., 90 [10] 3070–3072 (2007)
  4. H. Li, W. Y. Shih, andW.-H. Shih, “Stable aqueous ZnS quantum dots using (3-mercaptopropyl) trimethoxysilane as capping molecule,” Nanotechnology, 18, 495605 (2007)
  5. H. Yegingil, W, Y, Shih, andW.-H. Shih, “Probing Elastic Modulus and Depth of Inclusions in Model Tissues Using Piezoelectric Cantilevers,” Rev. Sci. Instru., 78, 115101 (2007)
  6. Z. Shen, W. Y. Shih andW.-H. Shih, “Mass Detection Sensitivity of Piezoelectric Cantilevers with a Nonpiezoelectric Extension,” IEEE Trans. on Ultra. Ferro. Freq. Cont., 54, 2001 (2007)
  7. H. Luo, W. Y. Shih, andW.-H. Shih, “Double Precursor Solution Coating approach for Low-Temperature Sintering of [Pb(Mg1/3Nb2/3)O3]0.63[PbTiO3]0.37 Solids,” J. Am. Ceram. Soc., 90, 3825 (2007)
  8. Q. Zhu, W. Y. Shih, andW.-H. Shih, “Mechanism of the Flexural Resonance Frequency Shift of a Piezoelectric Microcantilever Sensor in a DC Bias Electric Field,” Appl. Phys. Lett., 92, 033503 (2008)
  9. J.-P. McGovern, W. Y. Shih, R. Rest, M. Purohit, Y. Pandya, andW.-H. Shih, “Label-Free Flow-Enhanced Specific Detection of Bacillus anthracis Using a Piezoelectric Microcantilever Sensor,” The Analyst, 133, 649-654 (2008)
  10. Q. Zhu, W. Y. Shih, andW.-H. Shih, “Mechanism of Flexural Resonance Frequency Shift of a Piezoelectric Microcantilever Sensor During Humidity Detection,” Appl. Phys. Lett., 92, 183505 (2008)
  11. J. Capobianco, W. Y. Shih, Q.-A. Yuan, G. P. Adams, andW.-H. Shih, “Label-free, All-electrical, In-Situ Human Epidermal Growth Receptor-2 Detection,” Rev. Sci. Instrum. 79, 076101 (2008)
  12. H. Li, W. Y. Shih, andW.-H. Shih, “Synthesis of Na0.5K0.5NbO3 Piezoelectrics by a Solution Coating Approach,” Inter. J. Appl. Ceram. Tech., DOI:10.1111/j.1744-7402.2008.02272.x
  13. A. G. Zhou, S. Basu andM. W. Barsoum, “Kinking Nonlinear Elasticity, Damping and Microyielding of Hexagonal-Closed-Packed Metals”, Acta Mater., 59, 60-67 (2008).
  14. S. Basu andM. W. Barsoum, “On the Use of Spherical Nanoindentations to Determine the Deformation Micromechanics of ZnO Single Crystals”, J. Mater. Res., 22, 2470-2477 (2007).
  15. C. Lange,M. W. Barsoum& P. Schaaf, “Towards the Synthesis of MAX Phase Functional Coatings by Pulsed Laser Deposition”, Appl. Surface Science, 254, 1232-1235 (2007).
  16. A. J. Moseson, S. Basu andM. W. Barsoum, “On the Determination of The Effective Zero Point Of Contact For Spherical Nanoindentation”, J. Mater. Res., 23, 204-209 (2008).
  17. N. Haddad, E. Garcia-Caurel, L. Hultman,M. W. Barsoumand G. Hug. “Dielectric Properties of T2AlC and Ti2AlN MAX Phases: the Conductivity Anisotropy”, J. Appl. Phys. 104, 023531 (2008).
  18. E. N. Hoffman, G. Yushin, T. El-Raghy,Y. GogotsiandM. W. Barsoum, “Micro and Mesoporosity of Carbon Derived from Metal Carbides”, Micropor. Macropor. Mater., 112, 526-532 (2008).
  19. M. Radovic, A. Ganguly andM. W. Barsoum, “Elastic Properties and Phonon Conductivities of Ti3Al(C0.5,N0.5)2 and Ti2Al(C0.5,N0.5) Solid Solutions”, J. Mater. Res., 23, 1517-1521 (2008).
  20. O. D. Leaffer, S. Gupta,M. W. Barsoum,J. E. Spanier, “On the Raman Scattering from Selected M2AC Compounds”, J. Mater. Res., 22, 2651-2654 (2007).
  21. D. Filimonov, S. Gupta, T. Palanisamy andM. W. Barsoum, “Tribological Behavior of Select MAX Phases Against Al2O3 at Elevated Temperatures”, Wear, 265, 560-565 (2008).
  22. M. K. Drulis, H. Drulis, A. E. Hackemer, O. Leaffer, J. Spanier, S. Amini,M. W. BarsoumT. Guilbert and T. El-Raghy, “On the Heat Capacities of Ta2AlC, Ti2SC and Cr2GeC”, J. Appl. Phys., 104, 23526 (7 pp.) (2008).
  23. T. H. Scabarozi, S. Amini, P. Finkel, O. D. Leaffer,J. E. Spanier,M. W. Barsoum, M. Drulis, H. Drulis, W. M. Tambussi, J. D. Hettinger and S. E. Lofland, “Electrical, Thermal, and Elastic Properties of the MAX-Phase Ti2SC”, J. Appl. Phys., 104, 033502 (2008).
  24. S. Kulkarni, M. Merlini, N. Phatak, S. K. Saxena, G. Artioli, S. Gupta andM. W. Barsoum, “High Temperature Thermal Expansion and Stability of V2AlC Up to 950 °C”, J. Amer. Cer. Soc., 90, 3013-3016 (2007).
  25. S. Gupta, D. Filimonov, V. Zaitsev,M. W. Barsoumand T. Palanisamy, "Ambient & 550 °C Tribological Behavior of Select MAX Phases Against Ni-based Superalloys", Wear, 264, 270-278 (2008).
  26. S. Gupta, S. Amini, D. Filimonov, T. Palanisamy, T. El-Raghy andM. W. Barsoum, "Tribo-logical Behavior of Ti2SC at Ambient and Elevated Temperatures", J. Amer. Cer. Soc. 90, 3566-3571 (2007).
  27. S. Amini,M. W. Barsoumand T. El-Raghy, “Synthesis and Mechanical Properties of Fully Dense Ti2SC”, J. Amer. Cer. Soc., 90, 3953-3958 (2007).
  28. S. Basu, A. Zhou andM. W. Barsoum, “Reversible Dislocation Motion under Contact Loading in LiNbO3 Single Crystals”, J. Mater. Res., 23, 1134-1138 (2008).
  29. S. Kulkarni, S. Vennila, N. Phatak, S. K. Saxena, C. S. Zha, T. El-Raghy,M. W. Barsoum, W. Luo and R. Ahuja, “Study of Ti2SC Under Compression up to 47 GPa”, J. Alloy Compds. 448, pp. L1-L4 (2008).
  30. S. Amini, A. Zhou, A. DeVillier, S. Gupta, P. Finkel andM. W. Barsoum, “Synthesis, Elastic and Mechanical Properties of Cr2GeC”, J. Mater. Res., 23, 2157-2165 (2008).
  31. T. H. Scabarozi, P. Eklund, J. Emmerlich, H. Högberg, T. Meehan, J. D. Hettinger, P. Finkel, S. E. Lofland, L. Hultman andM. W. Barsoum, “Weak Electronic Anisotropy in the Layered Nanolaminate Ti2GeC”, Solid State Comm. 146, 498-501 (2008).
  32. B. Manoun, S. Amini, S. Gupta, S. K. Saxena andM. W. Barsoum, "On the Compression Behavior of Cr2GeC and V2GeC to Quasi-hydrostatic Pressures of 50 GPa”, J. Phys.: Conden. Matter., 19, 456218 (7 pp) (2007).
  33. Z.-M. Sun, H. Hashimoto andM. W. Barsoum, “On the Effect of Environment on the Spontaneous Growth of Pb Whiskers From Commercial Brasses at Room Temperature”, Acta Mater., 55, 3387-3396 (2007).
  34. S. Gupta, D. Filimonov, T. Palanisamy, T. El-Raghy andM. W. Barsoum,"Ta2AlC and Cr2AlC Ag-based Composites - New Solid Lubricant Materials for Use Over a Wide Temperature Range Against Ni-based Superalloys", Wear, 262, 1479-1489 (2007).
  35. V. V. Panic, V. M. Jovanovic, S. I. Terzic,M. W. Barsoum, V. D. Jovic and A. B. Dekanski “The Properties of Electroactive Ruthenium Oxide Coatings Supported by Titanium-based Ternary Carbides” Surface Coatings Tech. 202, 319-324 (2007).
  36. S. Li, R. Ahuja,M. W. Barsoum, P. Jena, and B. Johansson, “Optical Properties of Ti3SiC2 and Ti4AlN3”, Appl. Phys. Lett., 92, 221907 (2008).
  37. Ho, E., Lowman, A., andMarcolongo, M., "In situ apatite forming injectable hydrogel", Journal of Biomed., Mater. Res., Journal of Biomedical Materials Research Part A 83A(1): 249-256, 2007.
  38. Katti, J.,Marcolongo, M., Lowman, A., Mannsman, K., " Friction and wear behavior of PVA/PVP hydrogels for articular cartilage replacement”, Journal of Biomedical Materials Research Part A 83A(2): 471-479, 2007.
  39. Ooms, K.J., Cannella, M., Vega, A. J.,Marcolongo, M., Polenova, T., “The application of 23Na DQF NMR spectroscopy for the study of spinal disc degeneration”, Mag. Res. in Med., 60(2) 246-52, 2008.
  40. Joshi,A., Vresilovic, E., Cannella, M., Arthur, A., Karduna, A.,Marcolongo, M., "The effect of partial denulceation on the mechanical behavior of the intervertebral disc", J. Biomech., 41(10) 2104-2111.
  41. “On the heat capacities of Ta2AlC, Ti2SC and Cr2GeC,” H. Drulis, O. D. Leaffer,J. E. SpanierandM. W. Barsoum, J. Appl. Phys., in press.
  42. “Excitation of local field enhancement on silicon nanowires,” L. Cao, B. Garipcan, E. Piskin, B. Nabet andJ. E. Spanier, “Excitation of local field enhancement on silicon nanowires,” Nano Lett 8, 601-605, (2008).
  43. “Time response of two-dimensional gas-based vertical field metal-semiconductor-metal photodetectors,” X. Zhao, E. M. Gallo,J. E. Spanier, B. Nabet, M. Currie, A. Cola and F. Quaranta, IEEE Trans. Electron. Dev. 55, 1762-1770 (2008).
  44. “Controllable formation of nano-scale patterns on TiO2 by conductive-AFM nanolithography,” B. Garipcan, J. Winters*, J. S. Atchison, M. Cathell, J. Schiffman, O. D. Leaffer, S. S. Nonnenmann, C. L. Schauer, E. Piskin, B. Nabet, andJ. E. Spanier, Langmuir 24, 8944 (2008).
  45. “Electrical, thermal and elastic properties of Ti2SC: an unusual MAX-phase material,”T. H. Scabarozi, S. Amini, P. Finkel, O. D. Leaffer,J. E. Spanier,M. W. Barsoum, S. E. Lofland, J. D. Hettinger, J. Appl. Phys. 104, 033502 (2008).
  46. “In vitro biocompatibility of plain and doped silicon nanowires,” S. Odabas, B. Garipcan, G. Demriel, J. Burger, B. Nabet,J. E. Spanier, E. Piskin, Tissue Engineering Part A 14, 863 (2008).
  47. O. D. Leaffer, S. Gupta,M. W. BarsoumandJ. E. Spanier, “On the Raman scattering from selected M2AC compounds,” J. Mater. Res. 22, 2651-2654, (2007).
  48. Bora Garipcan, Johna Winters**, Jennifer S. Atchison, Matthew D. Cathell, Jessica D. Schiffman, Oren D. Leaffer, Steven S. Nonnenmann,Caroline L. Schauer, Erhan Piskin, Bahram Nabet, Jonathan E. Spanier Langmuir 2008, 24(16), 8944-8949. “Controllable formation of nanoscale patterns on TiO2 by conductive-AFM nanolithography”
  49. Holly A. McIlwee**;Caroline L. Schauer; Vera G. Praig, Rabah Boukherroub; Sabine Szunerits Analyst 2008, 133, 673-677. “Thin chitosan films as a platform for SPR sensing of ferric ions”
  50. Jessica D. Schiffman,Caroline L. SchauerPolymer Reviews 2008, 48(2) 1-36. “A Review: Electrospinning of Biopolymer Nanofibers and their Applications” (Invited for thematic issue on “Polymer Fibers”)
  51. Jennifer L. Vondran; Wei Sun;Caroline L. SchauerJournal of Applied Polymer Science, 2008 109, 968-975. “Crosslinked, Electrospun Chitosan-Poly(ethylene oxide) Nanofiber Mats” (Written up in Materials Views In Brief section June 2008)
  52. Vera G. Praig, Holly A. McIlwee**,Caroline L. Schauer, Rabah Boukherroub, Sabine Szunerits Journal of Nanoscience and Nanotechnology 2008 8(10), in press. “Heavy-metal sensing utilizing localized Surface Plasmon Resonance on gold nanoparticle-modified chitosan films” (Invited article for special issue “Advanced Materials for Nanoscience and Nanotechnology”)
  53. Matthew D. Cathell, Janah C. Szewczyk, Frances A. Bui*, Carrie A. Webber**, Jessica D. Wolever**, Jenny Kang#,Caroline L. SchauerBiomacromolecules, 2008 9(1) 289-295. “Structurally Colored Thiol Chitosan Thin Films as a Platform for Aqueous Heavy Metal Ion Detection”
  54. Jessica D. Schiffman;Caroline L. SchauerBiomacromolecules, 2007, 8(9) 2665-2667. “One-step electrospinning of cross-linked chitosan fibers”
  55. M. Havel, K. Behler, G. Korneva,Y. Gogotsi, Transparent thin films of multiwalled carbon nanotubes self-assembled on polyamide 11 nanofibers, Advanced Functional Materials, 18, 2322–2327 (2008)
  56. C. Portet, J. Chmiola,Y. Gogotsi, S. Park, K. Lian, Electrochemical Characterizations of Carbon Nanomaterials by the Cavity Microelectrode Technique, Electrochimica Acta 53, 7675-7680 (2008)
  57. S. Osswald, M. Havel, V. Mochalin, G. Yushin,Y. Gogotsi, Increase of Nanodiamond Crystal Size by Selective Oxidation, Diamond and Related Materials, 17, 1122–1126 (2008)
  58. D. Mattia,Y. Gogotsi, Review: Static and Dynamic Behavior of Liquids inside Carbon Nanotubes, Microfluidics and Nanofluidics 5, 289–305 (2008) (invited review)
  59. A.L. Yarin, C.M. Megaridis, D. Mattia,Y. Gogotsi, Smoothing of nanoscale roughness based on the Kelvin effect, Nanotechnology 19, 365702 (2008)
  60. M. G. Schrlau, E. Brailoiu, S. Patel,Y. Gogotsi, N. Dun, H.H. Bau, Utilizing Carbon Nanopipettes to Characterize Calcium Pathways in Cancer Cells, Nanotechnology 19, 325102 (2008)
  61. C. Portet, G. Yushin,Y. Gogotsi, Effect of carbon particle size on electrochemical performance of supercapacitors, J. Electrochemical Society 155 (7) A531-A536 (2008)
  62. K.G. Kornev, D. Halverson, G. Korneva,Y. Gogotsi, G. Friedman, Magnetostatic interactions between carbon nanotubes filled with magnetic nanoparticles, Applied Physics Letters 92, 233117 (2008)
  63. J. Qu, Z. Zhao, J. Qiu,Y. Gogotsi, Self-assembly of carbon nanotube polyhedrons in microchannels, Chemical Communications (24) 2747-2749 (2008)
  64. E. N. Hoffman, G. Yushin, T. El-Raghy,Y. Gogotsi, andM. W. Barsoum, Micro and Meso-Porosity of Carbon Derived from Ternary and Binary Metal Carbides, Microporous and Mesoporous Materials, 112, 526–532 (2008)
  65. Z. G. Cambaz, G. Yushin, S. Osswald, V. Mochalin,Y. Gogotsi, Noncatalytic Synthesis of Carbon Nanotubes, Graphene and Graphite on SiC, Carbon 46 (6) 841-849 (2008)
  66. V. Domnich, Y. Aratyn, W.M. Kriven,Y. Gogotsi, Temperature dependence of silicon hardness: Experimental evidence of phase transformations, Reviews on Advanced Materials Science 17 (1-2) 33-41 (2008)
  67. J. Chmiola, C. Largeot, P.-L. Taberna, P. Simon,Y. Gogotsi, Desolvation of ions in subnanometer pores, its effect on capacitance and double-layer theory, Angewandte Chemie Int. Edition 47 (18), 3392-3395 (2008)
  68. H. J. Shah, A. K. Fontecchio, D. Mattia,Y. Gogotsi, Field Controlled Nematic-to-Isotropic Phase Transition in Liquid Crystal – Carbon Nanotube Composites, J. Appl. Phys. 103 (1) 064314 (2008) April 7, 2008 issue of Virtual Journal of Nanoscale Science & Technology.
  69. C. Largeot, C. Portet, J. Chmiola, P.L. Taberna,Y. Gogotsi, P. Simon, Relation between the Ion Size and Pore Size for an Electric Double-Layer Capacitor, J. Am. Chem. Soc. 130 (9), 2730-2731 (2008)
  70. A. Gurga, V. Mochalin, D. Pepe, C. Picardi,Y. Gogotsi, Nanoindentation Study of the Effect of Nanodiamond Additives on Electroless Deposition Nickel-Boride Coating, Advances in Technology of Materials and Materials Processing Journal (ATM), 10 (1) 47-52 (2008). Also published in AZojomo Journal of Materials Online, 2, October 2006, 1-9 (2006)
  71. A. Sabur, M. Havel,Y. Gogotsi, SERS intensity optimization by controlling the size and shape of faceted gold nanoparticles, Journal of Raman Spectroscopy, 39 (1) 61-67 (2008)
  72. Y. Gogotsi, R. K. Dash, G. Yushin, B. E. Carroll, S. R. Altork, S. Sassi-Gaha, R. F. Rest, Bactericidal Activity of Chlorine-Loaded Carbide-Derived Carbon against Escherichia coli and Bacillus anthracis, Journal of Biomedical Materials Research: Part A, 84A (3) 607-613 (2008)
  73. G. N. Yushin, Z. G. Cambaz,Y. Gogotsi, K. Vyshnyakova, L.N. Pereselentseva, Carbothermal Synthesis of a-SiC Micro-Ribbons, Journal of the American Ceramic Society, 91 (1), 83-87 (2008)
  74. C. Portet, G. Yushin,Y. Gogotsi, Electrochemical performance of carbon onions, nanodiamonds, carbon black and multiwalled nanotubes in electrical double layer capacitors, Carbon 45, 2511–2518 (2007)
  75. S. Osswald, A. Gurga, F. Kellogg, K. Cho, G. Yushin,Y. Gogotsi, Plasma Pressure Compaction of Nanodiamond, Diamond and Related Materials 16, 1967–1973 (2007)
  76. K. Behler, M. Havel,Y. Gogotsi, New solvent for polyamides and its application to the electrospinning of polyamides 11 and 12, Polymer 48, 6617-6621 (2007)
  77. J. M. Razal, J. Coleman, E. Muñoz, B. Lund,Y. Gogotsi, H. Ye, S. Collins, A. B. Dalton, R. H. Baughman, Gels, Fibers and Shaped Assemblies from Spinning Carbon Nanotubes, Advanced Functional Materials, 17 (15), 2918-2924 (2007)
  78. X. Chen, K. K. Tenneti,C. Y. Li*, Y. Bai, R. Zhou, X. Wan, X. Fan, Q-F Zhou*, “Synthesis and Characterization of Side Chain Liquid Crystalline Poly(meth)acrylates with Bent-core Mesogens”, Macromolecules, 2007, 40, 840-848.
  79. L. Li,C. Y. Li, C. Ni, L. Rong and B. S. Hsiao, Structure and Crystallization Behavior of Nylon 66/Multi-Walled Carbon Nanotube Nanocomposites at Low Carbon Nanotube Contents, Polymer, 2007, 48, 3452-3460.
  80. K. K. Tenneti, X. Chen,C. Y. Li*, X. Wan, X. Fan, Q-F Zhou, L. Rong and B. S. Hsiao, Hierarchical Nanostructures of Bent-core Molecules Blended with Poly(styrene-b-4-vinyl pyridine) Block Copolymer, Macromolecules, 2007,40, 5095-5102.
  81. L. Li, B. Li, G. Yang,C. Y. Li*, Polymer Decoration on Carbon Nanotubes via Physical Vapor Deposition, Langmuir, 2007, 23, 8522-8525.
  82. M. J. Birnkrant,C. Y. Li*, L. V. Natarajan, V. P. Tondiglia, P. F. Lloyd, R. L. Sutherland, T. J. Bunning,* “Layer-in-Layer Hierarchical Nanostructures Fabricated by Combining Holographic Polymerization and Block Copolymer Self Assembly”, Nano Lett. 2007, 7, 3128-3133.
  83. B. Li, C. Y. Ni,C. Y. Li*, Polyethylene Oxide Singe Crystal Templated Au Nanoparticle Patterning and Asymmetrical Functionalization, Macromolecules, 2008,41, 149-155.
  84. K. K. Tenneti, X. Chen,C. Y. Li*, X. Wan, X. Fan, Q-F Zhou,* L. Rong and B. S. Hsiao, Competition between liquid crystallinity and block copolymer microphase separation in core shell rod-coil block copolymers, Soft Matter 2008 4, 458-461.
  85. D. H. Wang, P. Mirau, B. Li,C. Y. Li, J. B. Baek, and L-S Tan*, “Grafting of Vapor-Grown Carbon Nanofibers (VGCNF) with a Hyperbranched Poly(ether-ketone), Chem. Mater. 2008 20, 1502-1515.
  86. B. Zhao*, X. Jiang, D. Li, X. Jiang, T. G. O’Lenick, B. Li,C. Y. Li, “Hairy Particle-Supported 4-N,N-Dialkylaminopyridine: an efficient and recyclable Nucleophilic Catalyst” J. Polym. Sci. Polym. Chem. 2008 46, 3438-3446.
  87. B. B. Wang, B. Li, B. Zhao,C. Y. Li, “Amphiphilic Janus gold nanoparticles via combining "Solid-State Grafting-to" and "Grafting-from" methods” J. Am. Chem. Soc. 130, 11594-11595.
  88. Saiz E., Tomsia A.P., Lee J.S., Mankani M.H., Marshall S.J., Marshall G.W., Wegst U.G.K., “Novel nanocomposites for bone regeneration,” Advanced Materials & Processes, 166(7), 66-67 (2008).
  89. Wegst, U.G.K., “Bamboo and Wood in Musical Instruments,” Annual Review in Materials Research, 38, (doi:10.1146/annurev.matsci.38.060407.132459) (2008).
  90. Wegst, U.G.K.*, Oberhoff, S., Weller, M. and Ashby, M.F., “Materials selection criteria for violin bows,” International Journal of Materials Research, 12, 1230-1237 (2007).
  91. Juodkazis, S., Mizeikis V., Seet, K.K., Misawa H., andWegst, U.G.K., “Mechanical properties and tuning of three-dimensional polymeric photonic crystals,” Applied Physics Letters, 91, 241904 (2007).
  92. Wegst, U.G.K.* and Ashby, M.F., “The structural efficiency of orthotropic stalks, stems and tubes,” Journal of Materials Science, 42(11), 9005-9014 (2007).