Annual Report 2009: Publications List

Books, Chapters, Editorials:

  1. M. W. Barsoumand S. Basu, “Kinking Nonlinear Elastic Solids”, Encyclopedia of Materials Science and Technology, Eds. K. H. J. Buschow, R. W. Cahn, M. C. Flemings, E. J. Kramer, S. Mahajan and P. Veyssiere, Elsevier Science, Amsterdam, 2009. This is my third entry in the Encyclopedia of Materials Science and Technology.
  2. M. W. Barsoum, The MAX Phases and Their Properties”, Ceramics Science and Technology, Vol. 2: Properties, Eds. R. Riedel & I.-W. Chen, Wiley-VCH Verlag GmbH & Co (2009).
  3. T. Kyotani, J. Chmiola,Y. Gogotsi, Carbide Derived Carbon and Templated Carbons, Chapter 3 in Carbon Materials for Electrochemical Energy Storage Systems, edited by F. Beguin and E. Frackowiak, CRC Press/Taylor and Francis, pp. 77-113 (2009).
  4. F. Ko andC. Y. Li, Nanofiber materials, Cambridge Univ. In Preparation, to be published in 2010.
  5. Jessica D. Schiffman,Caroline L. Schauer, Nanofibers: Fabrication, Performance, and Applications ed. Frank Columbus, Nova Science Publishers, Inc, in press 2009. (Invited) “Mechanical and Permittivity Studies of Chitosan and Chitin Nanofibrous Meshes”

Refereed Journal Publications:

  1. S. Amini, J. M. Córdoba Gallego, L. Daemen, A. R. McGhie, C. Ni, M. Odén, L. Hultman andM. W. Barsoum, “On the Stability of Mg Nanograins to Coarsening after Repeated Melting”, Nano Letters, 9, 3082–3086 (2009).
  2. S. R. Kulkarni, M. Merlini, N. Phatak, S. K. Saxena, G. Artioli, S. Amini andM. W. Barsoum, “Thermal Expansion and Stability of Ti2SC in Air and Inert Atmospheres”, J. Alloy Compnds., 469, 395-400 (2009).
  3. P. Finkel, A. G. Zhou, S. Basu, O. Yeheskel andM. W. Barsoum, "Direct Observation of Nonlinear Acousto-Elastic Hysteresis in Kinking Nonlinear Elastic Solids”, Appl. Phys. Lett., 94, 241904 (2009).
  4. D. Filimonov S. Gupta, T. Palanisamy andM. W. Barsoum, “Effect of Applied Load and Surface Roughness on the Tribological Properties of Ni-Based Superalloys Versus Ta2AlC/Ag or Cr2AlC/Ag Composites”, Tribo. Lett., 33, 9-20 (2009).
  5. S. Basu, A. Zhou andM. W. Barsoum, “On Spherical Nanoindentations, Kinking Nonlinear Elasticity of Mica Single Crystals and Their Geological Implications”, J. Struct. Geology, 31, 791–801 (2009).
  6. T. H. Scabarozi, J. Roche, A. Rosenfeld, S. H. Lim, L. Salamanca-Riba, I. Takeuchi,M. W. Barsoum, J. D. Hettinger, S. E. Lofland, “Synthesis and Characterization of Nb2AlC Thin Films”, Thin Solid Films, 517, 2920-2933 (2009).
  7. S. Amini, C. Ni andM. W. Barsoum, “Processing, Microstructural Characterization and Damping of a Ti2AlC/Nanocrystalline Mg-Matrix Composite”, Comp. Scien. Techn., 69, 414–420 (2009).
  8. A. R. Sakulich, E. Anderson, C. Schauer, andM. W. Barsoum, “Mechanical and Microstructural Characterization of an Alkali Activated Slag/Limestone Fine Aggregate Concrete”, Const. Build. Mater. 23, 2951-2957 (2009).
  9. A. Zhou andM. W. Barsoum, “Kinking Nonlinear Elasticity and the Deformation of Mg”, Met. Mater. Trans. A, 40A, 1741-1756 (2009).
  10. R. Buchs, S. Basu, O. Elshrief, R. Coward andM. W. Barsoum, “Vickers and Spherical Nanoindentation Study of the Deformation of Poled BaTiO3 Single Crystals”, J. Appl. Phys., 105, 093540 (2009).
  11. S. Amini, A. R. McGhie andM. W. Barsoum, “On the Isothermal Oxidation of Ti2SC in Air”, J. Electrochem. Soc., 156, P101-106 (2009).
  12. T. H. Scabarozi, S. Amini, O. Leaffer, A. Ganguly, S. Gupta, W. Tambussi, S. Clipper, J.E. Spanier,M. W. Barsoum, J. D. Hettinger, S. E. Lofland, “Thermal Expansion of Select MAX Phases Measured by High Temperature X-ray Diffraction and Dilatometry”, J. Appl. Phys., 105, 013543 (2009).
  13. E. N. Hoffman, G. Yushin, B. G. Wendler,M. W. Barsoum, Y. Gogotsi, “Carbide Derived Carbon Membrane”, Mater. Chem. Phys., 112, 587–59 (2008).
  14. S. Basu, M. Radovic andM. W. Barsoum, “Room Temperature Constant-Stress Creep of a Brittle Solid Studied by Spherical Nanoindentation”, J. Appl. Phys., 104, 063522 (2008).
  15. T. Scabarozi, A. Ganguly, J. D. Hettinger, S. E. Lofland, S. Amini, P. Finkel, T. El-Raghy andM. W. Barsoum, “Electronic and Thermal Properties of Ti3Al(C0.5,N0.5)2, Ti2Al(C0.5,N0.5) and Ti2AlN”, J. Appl. Phys., 104, 073713 (2008).
  16. Y. Gogotsi, C. Portet, S. Osswald, J. M. Simmons, T. Yildirim, G. Laudisio, J. E. Fischer, Importance of Pore Size in High Pressure Hydrogen Storage by Porous Carbons, International Journal of Hydrogen Energy, 34, 6314-6319 (2009)
  17. S. Osswald, C. Portet,Y. Gogotsi, G. Laudisio, J.P. Singer, J.E. Fischer, V.V. Sokolov, J.A. Kukushkina, A.E. Kravchik, Porosity control in nanoporous carbide-derived carbon by oxidation in air and carbon dioxide, Journal of Solid State Chemistry, 182 (7), 1733–1741 (2009)
  18. Portet, M.A. Lillo-Rodenas, A. Linares-Solano,Y. Gogotsi, Capacitance of KOH Activated Carbide-Derived Carbons, Physical Chemistry Chemical Physics 11, 4943-4945 (2009)
  19. S. Pathak, Z. G. Cambaz,S. R. Kalidindi, J.G. Swadener,Y. Gogotsi, Viscoelasticity and High Buckling Stress of Dense Carbon Nanotube Brushes, Carbon 47, 1969 –1976 (2009)
  20. V. Mochalin, A. Sagar, S. Gour,Y. Gogotsi, Manufacturing Nanosized Fenofibrate by Salt Assisted Milling, Pharmaceutical Research 26 (6) 1365-1370 (2009)
  21. S.-H. Yeon, S. Osswald,Y. Gogotsi, J. P. Singer, J. M. Simmons, J. E. Fischer, M.A. Lillo-Rodenas, A. Linares-Solano, Enhanced Methane Storage of Chemically and Physically Activated Carbide-Derived Carbon, J. Power Sources, 191 (2) 560–567 (2009)
  22. V. Mochalin,Y. Gogotsi, Wet Chemistry Route to Hydrophobic Blue Fluorescent Nanodiamond, J. Am. Chem. Soc. 131 (13), 4594–4595 (2009)
  23. M. P. Rossi,Y. Gogotsi, K. G. Kornev, Deformation of Carbon Nanotubes by Exposure to Water Vapor, Langmuir, 25 (5), 2804-2810 (2009)
  24. H. S. Kim, J. P. Singer,Y. Gogotsi, J. E. Fischer, Molybdenum carbide-derived carbon for hydrogen storage, Microporous and Mesoporous Materials, 120 (3), 267–271 (2009)
  25. K.D. Behler, A. Stravato, V. Mochalin, G. Yushin, G. Korneva,Y. Gogotsi, Nanodiamond-Polymer Composite Fibers and Coatings, ACS Nano 3 (2), 363-369 (2009)
  26. M. Seredych, C. Portet,Y. Gogotsi, T. J. Bandosz, Nitrogen Modified Carbide Derived Carbons as Adsorbents of Hydrogen Sulfide, Journal of Colloid and Interface Science 330 (1) 60-66 (2009)
  27. V. Mochalin, S. Osswald,Y. Gogotsi, Contribution of Functional Groups to the Raman Spectrum of Nanodiamond Powders, Chemistry of Materials 21 (2) 273–279 (2009)
  28. G. Yushin, C. Portet, Z. Yang, Y. Korenblit,Y. Gogotsi, R. Mokaya, Electrical Double Layer Capacitance of Zeolite-Templated Carbon in Organic Electrolyte, Journal of the Electrochemical Soc. 156 (1) A1-A6 (2009)
  29. R. Lin, P.L. Taberna, J. Chmiola, D. Guay,Y. Gogotsi, P. Simon, Microelectrode study of pore size, ion size and solvent effects on the charge/discharge behavior of microporous carbons for electrical double layer capacitors, Journal of the Electrochemical Soc. 156 (1) A7-A12 (2009)
  30. P. Simon,Y. Gogotsi, Materials for Electrochemical Capacitors, Nature Materials 7(11) 845-854 (2008)
  31. J. P. Singer, A. Mayergoyz, C. Portet, E. Schneider,Y. Gogotsi, J. E. Fischer, Enhanced Volumetric Hydrogen Storage Capacity of Porous Carbon Powders by Forming Peels or Pellets, Microporous and Mesoporous Materials, 116 (1-3), 469–472 (2008)
  32. E. N. Hoffman, G. Yushin, B. G. Wendler, M. W. Barsoum,Y. Gogotsi, Carbide Derived Carbon Membrane, Materials Chemistry and Physics, 112, 587-591 (2008)
  33. S. Osswald, K. Behler,Y. Gogotsi, Laser-Induced Light Emission from Carbon Nanoparticles, J. Applied Physics, 104, 074308 (2008); October 13, 2008 issue of Virtual Journal of Nanoscale Science & Technology
  34. Staack, A. Fridman, A. Gutsol,Y. Gogotsi, G. Friedman, Nanoscale Corona Discharge Probes for Optical Emission Spectroscopy in Liquids, Angewandte Chemie Int. Ed., 47, 8020 –8024 (2008)
  35. Kalidindi, SR; Knezevic, M; Niezgoda, S, et al., "Representation of the orientation distribution function and computation of first-order elastic properties closures using discrete Fourier transforms", ACTA MATERIALIA Volume: 57 Issue: 13 Pages: 3916-3923 Published: 2009.
  36. Pathak, S; Cambaz, ZG;Kalidindi, SR, et al., "Viscoelasticity and high buckling stress of dense carbon nanotube brushes", CARBON Volume: 47 Issue: 8 Pages: 1969-1976 Published: 2009.
  37. Pathak, S; Stojakovic, D;Kalidindi, SR, "Measurement of the local mechanical properties in polycrystalline samples using spherical nanoindentation and orientation imaging microscopy", : ACTA MATERIALIA Volume: 57 Issue: 10 Pages: 3020-3028 Published: 2009.
  38. Kalidindi, SR; Donohue, BR; Li, SY, "Modeling texture evolution in equal channel angular extrusion using crystal plasticity finite element models", : INTERNATIONAL JOURNAL OF PLASTICITY Volume: 25 Issue: 5 Pages: 768-779 Published: 2009.
  39. Fullwood, DT;Kalidindi, SR; Adams, BL, et al., "A Discrete Fourier Transform Framework for Localization Relations", : CMC-COMPUTERS MATERIALS & CONTINUA Volume: 9 Issue: 1 Pages: 25-39 Published: 2009.
  40. Knezevic, M; Al-Harbi, HF;Kalidindi, SR, "Crystal plasticity simulations using discrete Fourier transforms", : ACTA MATERIALIA Volume: 57 Issue: 6 Pages: 1777-1784 Published: 2009.
  41. Pathak, S; Stojakovic, D;Doherty, R, et al., "Importance of surface preparation on the nano-indentation stress-strain curves measured in metals", : JOURNAL OF MATERIALS RESEARCH Volume: 24 Issue: 3 Pages: 1142-1155 Published: 2009.
  42. Pathak, S; Shaffer, J;Kalidindi, SR, "Determination of an effective zero-point and extraction of indentation stress-strain curves without the continuous stiffness measurement signal", : SCRIPTA MATERIALIA Volume: 60 Issue: 6 Pages: 439-442 Published: 2009.
  43. Niezgoda, SR; Fullwood, DT;Kalidindi, SR, "Delineation of the space of 2-point correlations in a composite material system", : ACTA MATERIALIA Volume: 56 Issue: 18 Pages: 5285-5292 Published: 2008.
  44. Wu, XP;Kalidindi, SR; Necker, C, et al., "Modeling Anisotropic Stress-Strain Response and Crystallographic Texture Evolution in alpha-Titanium during Large Plastic Deformation using Taylor-Type Models: Influence of Initial Texture and Purity", : METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE Volume: 39A Issue: 12 Pages: 3046-3054 Published: 2008.
  45. Fullwood, DT;Kalidindi, SR; Niezgoda, SR, et al., "Gradient-based microstructure reconstructions from distributions using fast Fourier transforms", : MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING Volume: 494 Issue: 1-2 Pages: 68-72 Published: 2008.
  46. Kalidindi, SR; Landi, G; Fullwood, DT, "Spectral representation of higher-order localization relationships for elastic behavior of polycrystalline cubic materials", : ACTA MATERIALIA Volume: 56 Issue: 15 Pages: 3843-3853 Published: 2008.
  47. Stravato, A., Mochalin, V., Picardi, S. C. andKnight, R., “HVOF Sprayed Nylon-11/ Nanodiamond Composite Coatings: Production and Characterization,” Journal of Thermal Spray Technology, 17 (5-6), pp. 812-817, December (2008).
  48. Li, B; Li, LY; Wang, BB, et al., "Alternating patterns on single-walled carbon nanotubes", NATURE NANOTECHNOLOGY Volume: 4 Issue: 6 Pages: 358-362 Published: 2009
  49. Jiang, XM; Wang, BB;Li, CY, et al., "Thermosensitive Polymer Brush-Supported 4-N,N-Dialkylaminopyridine on Silica Particles as Catalyst for Hydrolysis of an Activated Ester in Aqueous Buffers: Comparison of Activity with Linear Polymer-Supported Version and Effect of LCST Transition", JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY Volume: 47 Issue: 11 Pages: 2853-2870 Published: 2009.
  50. Tenneti, KK; Chen, XF;Li, CY, et al., "Influence of LC Content on the Phase Structures of Side-Chain Liquid Crystalline Block Copolymers with Bent-Core Mesogens", MACROMOLECULES Volume: 42 Issue: 10 Pages: 3510-3517 Published: 2009
  51. Li, CY, "Anisotropy unnecessary", NATURE MATERIALS Volume: 8 Issue: 4 Pages: 249-250 Published: 2009.
  52. Li, LY; Li, B; Hood, MA, et al., "Carbon nanotube induced polymer crystallization: The formation of nanohybrid shish-kebabs", POLYMER Volume: 50 Issue: 4 Pages: 953-965 Published: 2009
  53. Wang, BB; Li, B; Xiong, J, et al., Hierarchically Ordered Polymer Nanofibers via Electrospinning and Controlled Polymer Crystallization, MACROMOLECULES Volume: 41 Issue: 24 Pages: 9516-9521 Published: 2008
  54. B. B. Wang, B. Li, B. Zhao andC. Y. Li*, “Amphiphilic Janus gold nanoparticles via combining "Solid-State Grafting-to" and "Grafting-from" methods” J. Am. Chem. Soc. 2008, 130, 11594-11595.
  55. Li, C.Y., "Polymer single crystals meet nanoparticles", invited viewpoint, J. Poly. Soc. Poly. Phys., 2009, In Press.
  56. Joshi, A; Massey, CJ; Karduna, A, et al., "The Effect of Nucleus Implant Parameters on the Compressive Mechanics of the Lumbar Intervertebral Disc: A Finite Element Study", JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS Volume: 90B Issue: 2 Pages: 596-607 Published: 2009
  57. Liu, X; Fussell, G;Marcolongo, M, et al., "Characterization of Associating Hydrogels of Poly(vinyl alcohol) and Poly(vinyl pyrrolidone)", : JOURNAL OF APPLIED POLYMER SCIENCE Volume: 112 Issue: 1 Pages: 541-549 Published: 2009
  58. Ooms, KJ; Cannella, M; Vega, AJ, et al., "Na-23 TQF NMR imaging for the study of spinal disc tissue", : JOURNAL OF MAGNETIC RESONANCE Volume: 195 Issue: 1 Pages: 112-115 Published: 2008
  59. Ooms, KJ; Cannella, M; Vega, AJ, et al., "The application of Na-23 double-quantum-filter (DQF) NMR spectroscopy for the study of spinal disc degeneration", : MAGNETIC RESONANCE IN MEDICINE Volume: 60 Issue: 2 Pages: 246-252 Published: 2008
  60. Cannella, M; Arthur, A; Allen, S, et al., "The role of the nucleus pulposus in neutral zone human lumbar intervertebral disc mechanics", : JOURNAL OF BIOMECHANICS Volume: 41 Issue: 10 Pages: 2104-2111 Published: 2008
  61. Nair, K., Gandhi, M., Khalil,S., Yan, K.C.,Marcolongo, M., Barbee, K., and Sun, W., “Characterization of cell viability during bioprinting processes”, Biotechnol. J., 4(8) 1168-77, 2009.
  62. Baxter, R.M., Steinbeck, M.J., Tipper, J.L., Rimnac, C.M., Parvizi, J.,Marcolongo, M., Kurtz, S. M., “Comparison of Periprosthetic Tissue Digestion Methods for Polyethylene Wear Particle Extraction, J. Biomed. Mater. Res. B, 91B(1), 409-418, 2009.
  63. Sakulich, AR; Anderson, E;Schauer, C, et al., "Mechanical and microstructural characterization of an alkali-activated slag/limestone fine aggregate concrete", CONSTRUCTION AND BUILDING MATERIALS Volume: 23 Issue: 8 Pages: 2951-2957 Published: 2009.
  64. Binetti, VR; Schiffman, JD; Leaffer, OD, et al., "The natural transparency and piezoelectric response of the Greta oto butterfly wing", INTEGRATIVE BIOLOGY Volume: 1 Issue: 4 Pages: 324-329 Published: 2009.
  65. Schiffman, JD;Schauer, CL, "Solid state characterization of alpha-chitin from Vanessa cardui Linnaeus wings", MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS Volume: 29 Issue: 4 Pages: 1370-1374 Published: 2009.
  66. Fahnestock, KJ; Manesse, M; McIlwee, HA, et al., "Selective detection of hexachromium ions by localized surface plasmon resonance measurements using gold nanoparticles/chitosan composite interfaces", ANALYST Volume: 134 Issue: 5 Pages: 881-886 Published: 2009.
  67. Praig, VG; McIlwee, H;Schauer, CL, et al., "Localized Surface Plasmon Resonance of Gold Nanoparticle-Modified Chitosan Films for Heavy-Metal Ions Sensing", JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY Volume: 9 Issue: 1 Pages: 350-357 Published: 2009.
  68. Laudenslager, MJ; Schiffman, JD;Schauer, CL, "Carboxymethyl Chitosan as a Matrix Material for Platinum, Gold, and Silver Nanoparticles", BIOMACROMOLECULES Volume: 9 Issue: 10 Pages: 2682-2685 Published: 2008.
  69. Hsieh, CY; Chen, YF; Shih, WY, et al.,"Direct observation of two-step polarization reversal by an opposite field in a substrate-free piezoelectric thin sheet", APPLIED PHYSICS LETTERS Volume: 94 Issue: 13 Article Number: 131101 Published: 2009.
  70. Li, HD;Shih, WH; Shih, WY, "Synthesis of Na0.5K0.5NbO3 Piezoelectrics by a Solution Coating Approach", INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY Volume: 6 Issue: 2 Pages: 205-215 Published: 2009.
  71. Zhao, Q; Shih, WY;Shih, WH, "Effects of Processing Parameters on the Morphology of Precipitated Manganese Oxide Powders", INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH Volume: 48 Issue: 3 Pages: 1490-1494 Published: 2009.
  72. Li, H;Shih, WH; Shih, WY, et al., "Transfection of aqueous CdS quantum dots using polyethylenimine", NANOTECHNOLOGY Volume: 19 Issue: 47 Article Number: 475101 Published: 2008.
  73. Shih, WY; Zhu, Q;Shih, WH, "Length and thickness dependence of longitudinal flexural resonance frequency shifts of a piezoelectric microcantilever sensor due to Young's modulus change", JOURNAL OF APPLIED PHYSICS Volume: 104 Issue: 7 Article Number: 074503 Published: 2008.
  74. Q. Zhu, W. Y. Shih, andW.-H. Shih, “Mechanism of Flexural Resonance Frequency Shift of a Piezoelectric Microcantilever Sensor During Humidity Detection,” Appl. Phys. Lett., 92, 183505 (2008), PMC2682738, NIHMSID#112993
  75. J. Capobianco, W. Y. Shih, Q.-A. Yuan, G. P. Adams, andW.-H. Shih, “Label-free, All-electrical, In-Situ Human Epidermal Growth Receptor-2 Detection,” Rev. Sci. Instrum., 79, 076101 (2008), PubMed#18681738, PMC2678786
  76. W. Y. Shih andW.-H. Shih, “Response to “Comment on ‘Mechanism of flexural resonance frequency shift of a piezoelectric microcantilever sensor during humidity detection’ Appl. Phys. Lett., 93, 096101 (2008),” Appl. Phys. Lett., 93, 096102 (2008)
  77. “Ferroelectricity in chemical nanostructures: proximal probe characterization and the surface chemical environment”; Nonnenmann, SS;Spanier, JE; JOURNAL OF MATERIALS SCIENCE Volume: 44 Issue: 19 Pages: 5205-5213, 2009 (invited review)
  78. “The natural transparency and piezoelectric response of the Greta oto butterfly wing”; Binetti, VR; Schiffman, JD; Leaffer, OD, et al.; INTEGRATIVE BIOLOGY Volume: 1 Issue: 4 Pages: 324-329, 2009
  79. “Integrated plasmonic lens photodetector”; Shackleford, JA; Grote, R; Currie, M, et al. APPLIED PHYSICS LETTERS Volume: 94 Issue: 8 Article Number: 083501, 2009
  80. “Thermal expansion of select M > n+1 > AX > n phases measured by high temperature x-ray diffraction and dilatometry”; Scabarozi, TH; Amini, S; Leaffer, O, et al. JOURNAL OF APPLIED PHYSICS Volume: 105, 013543, 2009
  81. Taheri, ML; Browning, ND; Lewellen, J,"Symposium on Ultrafast Electron Microscopy and Ultrafast Science", MICROSCOPY AND MICROANALYSIS Volume: 15 Issue: 4 Pages: 271-271 Published: 2009.
  82. Taheri, ML; Lagrange, T; Reed, BW, et al., "Laser-Based In Situ Techniques: Novel Methods for Generating Extreme Conditions in TEM Samples", MICROSCOPY RESEARCH & TECHNIQUE Vol 72, Issue 3,Pgs: 122-130 (2009).
  83. Taheri, ML; Reed, BW; LaGrange, TB, et al., "In Situ Laser Synthesis of Si Nanowires in the Dynamic TEM", SMALL Volume: 4 Issue: 12 Pages: 2187-2190 Published: 2008.
  84. S. Kim, T. B. LaGrange, B. W. Reed,M. L. Taheri, M. R. Armstrong, W. E. King, N. D. Browning and G. H. Campbell ,"Imaging of Transient Structures using Nanosecond In Situ TEM", Science. 2008 Sep 12;321(5895):1472-5.
  85. LaGrange T, Campbell GH, Reed BW,Taheri M, Pesavento JB, Kim JS, Browning ND., "Nanosecond time-resolved investigations using the in situ of dynamic transmission electron microscope (DTEM).", Ultramicroscopy. 2008 Oct;108(11):1441-9. Epub 2008 Jun 26.
  86. James E. Evans, Geoffrey H. Campbell, Judy S. Kim, Thomas B. LaGrange, Bryan W. Reed,Mitra L. Taheri, Nigel D. Browning, "Single Shot Nanosecond Imaging in the Dynamic TEM", JEOL News Volume 44, Number 1, August 2009 / JEOL 60th Anniversary Issue.
  87. Saiz E., Tomsia A.P., Lee J.S., Mankani M.H., Marshall S.J., Marshall G.W., Wegst U.G.K., “Novel nanocomposites for bone regeneration,” Advanced Materials & Processes, 166(7), 66-67 (2008).
  88. Wegst, U.G.K., “Bamboo and Wood in Musical Instruments,” Annual Review in Materials Research, 38, (doi:10.1146/annurev.matsci.38.060407.132459) (2008).
  89. Wegst, U.G.K.*, Oberhoff, S., Weller, M. and Ashby, M.F., “Materials selection criteria for violin bows,” International Journal of Materials Research, 12, 1230-1237 (2007).
  90. Juodkazis, S., Mizeikis V., Seet, K.K., Misawa H., andWegst, U.G.K., “Mechanical properties and tuning of three-dimensional polymeric photonic crystals,” Applied Physics Letters, 91, 241904 (2007).
  91. Wegst, U.G.K.* and Ashby, M.F., “The structural efficiency of orthotropic stalks, stems and tubes,” Journal of Materials Science, 42(11), 9005-9014 (2007).
  92. McWilliams, B., andZavaliangos, A., “Multi-phenomena simulation of electric field assisted sintering”, Jounral of Materials Science, Volume 43, Number 14 / July, 2008
  93. Zavaliangos, A., Galen S., Cunningham J. C., and Winstead D. A., “Temperature Evolution During Compaction of Pharmaceutical Powders”, Journal of Pharmaceutical Science, Volume 97, Issue 8, Date: August 2008, Pages: 3291-3304